All Collections C2C
QuickStart Guides
C2C: Accsoon SeeMo & SeeMo Pro QuickStart Guide
C2C: Accsoon SeeMo & SeeMo Pro QuickStart Guide

How to set up your Accsoon SeeMo & SeeMo Pro with C2C

Robert Loughlin avatar
Written by Robert Loughlin
Updated over a week ago

Accsoon has released C2C support for their SeeMo. SeeMo 4K, and SeeMo Pro video capture devices. These devices allow you to record, stream, and monitor HDMI or SDI cameras right on your iOS device. With C2C now integrated, send your recordings straight to

Use this guide to quickly setup your Accsoon SeeMo or SeeMo Pro for C2C with settings recommended by

What you'll need

  • An Accsoon SeeMo or SeeMo Pro device

  • A supported iOS device (iPhone 8 or newer; iPad 6th Gen or newer; iPad Pro 9.7 inch, iPad Pro 10.5 inch, iPad Pro 11 inch, iPad Pro 12.9 inch; iPad Air 3rd Gen or newer; iPad Mini 5th Gen or newer)

  • Accsoon SEE iOS app installed on iOS device

  • HDMI or SDI cable*

  • NP-F battery or power source

  • A connection to the internet (WiFi or cellular)

  • A account with permissions to add cloud devices to projects

  • A project with C2C Connections enabled

*Note: only the SeeMo Pro supports SDI video


  1. Refer to your SeeMo's instructions on powering up and connecting your HDMI or SDI camera.

  2. Connect your iOS device to your SeeMo or SeeMo Pro and launch the Accsoon SEE app.

  3. Tap the logo on the screen to open the menu.

  4. In the menu, tap “Login”.

  5. Enter your account credentials then click “Allow” when prompted by the app to grant upload permissions for

  6. Once logged in, select which account you would like to work in, followed by which project within the selected account you would like to upload assets to.

  7. In the menu, set RECORD UPLOAD to ON and choose your desired setting for UPLOAD MODE and CELLULAR DATA UPLOADING. The REAL-TIME option for UPLOAD MODE will upload your recordings to while they're being recorded.

  8. Tap the settings icon in the lower right corner of the screen to open the encoder settings. Adjust these to match your workflow. For uploading over cellular connections, we recommend a bitrate between 3 and 5Mbps.


Where do I find the recordings on my device?

Recordings from the Accsoon SEE app will appear in your device's camera roll.

Where do I see my upload progress?

If REAL-TIME is selected for UPLOAD MODE, you will see a queue number and progress bar around the logo on the screen. You can also tap the logo and go to the UPLOAD tab of the window to see more information about the current uploads.

Did this answer your question?